KANSAI PX302 -Special Picoting Machine

the KANSAI PX302 Picoting machine- shohag enterprise
Machine Type Motor Operated
Body Material Cast Iron
Brand Kansai
Minimum Order Quantity 1

In Stock
Kansai Logo
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

KANSAI PX302 – Picoting machine

The KANSAI PX302 Picoting machine is a flatbed, 1 or 2 needle double chain-stitch machine for picotting and fagoting decorative stitch patterns. Because of the built-in cam that moves the needles left and right, this machine can sew zig-zag (2-5 points).
The MAC100 is a one-needle computerized PX four-point zig-zag machine with a wide range of zig-zag designs and flower picotting by electric system.
Picotting and fagotting, as well as flower stitching, are examples of applications (Flower Picot). These machines can be used to make handkerchiefs and table napkins in addition to women’s and children’s clothing.

 

KANSAI SPECIAL PICOTING MACHINE KANSAI PX302

the needle of KANSAI PX302 Picoting machine.

UO163 of Schmetz or Organ. Select the proper needle for the fabric and thread.
When replacing the needle, check the needle carefully.
to see that the scarf is turned to the rear of the.
machine.
1 Machine speed & direction in which the machine pulley runs.
Maximum speed : 3,500 rpm.
Standard speed : 3,000 rpm To extend approximately 15~20% below the maximum speed Replacing the needle. for the first 200 hours of operation (approx. 1 month). Then run the machine at the standard speed. The machine pulley turns counterclockwise as seen from the end of the machine pulley .

 Motor & belt

Motor : 3-phase, 2-pole, 400W clutch motor
Belt: M type V belt
Select the proper motor pulley according to the machine speed (refer to the motor pulley outer diameter on the table below). Adjust the position of the motor by pressing the finger onto the middle of the belt so that 1~2cm deflection can be
achieved (see the illustration).

 Oil

Use Kansai Special’s genuine oil

To fill the KANSAI PX302 Picoting machine with oil

Remove oil plug A. Fill the machine with oil until the oil level is at the top line (see H in the illustration) on oil gauge C. After the first lubrication, add oil so that the oil level will be between H and L. After filling the machine with oil, tighten plug A and run the machine to check the oil is splashing from oil pipe outlet B.
To extend machine life, be sure to replace the oil after the first 250 hours of operation. To replace the oil, follow the procedures below.
1.Remove the V belt from the motor pulley and then remove the machine from the table.
2. Remove screw D and then drain the oil. Be careful not to stain V belt with the oil.
3. After draining the oil, be sure to tighten screw D.
4. Fill the machine with oil by referring to 3-2 shown above. If filter element E is contaminated, proper oiling may not be performed. Clean the filter element every six months. If just a little or no oil flows out from the nozzle with the proper amount of oil in the machine, check the filter element. To clean the filter element, remove oil reservoir.

Where can I buy the KANSAI PX302 Picoting machine in Bangladesh?

You can buy the KANSAI PX302 Picoting machine from Shohag Enterprise . Also, We offer Juki, Brother, Siruba, Maqi, Kansai, Hashima, and other Brands’ industrial Sewing machines at best price in Bangladesh.

Brand

KANSAI

Kansai sewing machine runs quietly and effectively. They can stitch heavy and light waistbands, such as denim and woven fabrics, that are difficult for normal machines to sew. Long stitching, joining line tapes, lap seaming, inserting elastic, and cuffing suits and blazers are all done using them. Kansai machines have overcome problems like as puckering and twisting. Kansai machines have also eliminated material slippage with to their multi-needle double chain stitch. You can sew with up to three needles, five threads, and 8 to 16 stitches per inch. The Kansai sewing machine consumes 90% less energy than clutch motors, weighs 1/3 as much, and allows you to reverse the motor movement with a single button. Finally, no matter how firmly you push your foot on the pedal, the programmed speed remains the same, making it simple to use for both experienced sewers and beginners. Kansai machines are designed for those who prefer alternating between high-speed and low-speed jobs. These machines make the transition easy, allowing you to maintain control over your speed and concentrate on stitching.

Where can I buy KANSAI Industrial Sewing Machine?

You can buy from Shohag Enterprise. Also, We offer Juki, Brother, Siruba, Maqi, Kansai, Hashima, and other Brands’ various models of electrical industrial Sewing machines.
Kansai Logo

Reviews

There are no reviews yet.

Be the first to review “KANSAI PX302 -Special Picoting Machine”

Your email address will not be published. Required fields are marked *

Related products

  • KANSAI NB1433PSSM - 33 needle Smocking Sewing Machine | shohag enterprise
    Read more
    High-speed

    KANSAI NB1433PSSM – 33 needle Smocking Sewing Machine

    Rated 0 out of 5
    (0 reviews)
    Read more
  • Juki MF-7900 , MF-7900D Series coverstitch sewing machine in bd - shohag enterprise
    Read more
    Direct-drive

    JUKI MF-7900 MF-7900D Series Cylinder-bed, Top & Bottom Coverstitch sewing Machine

    Model name MF-7500 series MF-7500D series
    Stitch type 2-needle/3-needle/4-needle top and bottom covering stitch
    Needle UY128GAS (#10S) #9S~#12S
    Lift of the presser foot 5mm (with top and bottom covering stitch),
    8mm (with bottom covering stitch)
    Stitch pitch adjustment By dial
    Differential feed adjustment By micro-adjustment mechanism
    Lubrication Automatiac Automatic
    (frame: no lubrication)
    Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18)
    Feed dog inclination adjustment Provided as standard
    Micro-lifter Provided as standard
    Needle bar stroke converting function Provided as standard: 31mm: at the time of delivery /
    When sewing a heavy-weight material: 33mm
    Silicon oil tank for needle tip and needle thread Provided as standard
    Cartridge oil filter Provided as standard
    Power requirement Single-phase 100~120V / 200~240V,
    3-phase 200~240V (with automatic thread trimmer)
    Power consumption 500VA (with automatic thread trimmer)

    Weight of the machine head U11 45kg (without device), 53kg (with UT35), 58kg (with UT37)

    When you place orders

    Rated 0 out of 5
    (0 reviews)
    Read more
  • Juki MF-7500 Series coverstitch flatbed sewing machine in bd | shohag enterprise
    Read more
    Direct-drive

    JUKI MF-7500 MF-7500D Series Flat-bed, Top & Bottom Coverstitch Sewing Machine

    Model name MF-7500 series MF-7500D series.
    Stitch type 2-needle/3-needle/4-needle top and bottom covering stitch.
    Needle UY128GAS (#10S) #9S~#12S.
    Lift of the presser foot 5mm (with top and bottom covering stitch).
    8mm (with bottom covering stitch).
    Stitch pitch adjustment By dial.
    Differential feed adjustment By micro-adjustment mechanism.
    Lubrication Automatiac Automatic.
    (frame: no lubrication)
    Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18)
    Feed dog inclination adjustment Provided as standard
    Micro-lifter Provided as standard
    Needle bar stroke converting function Provided as standard: 31mm: at the time of delivery /
    When sewing a heavy-weight material: 33mm
    Silicon oil tank for needle tip and needle thread Provided as standard
    Cartridge oil filter Provided as standard
    Power requirement Single-phase 100~120V / 200~240V,
    3-phase 200~240V (with automatic thread trimmer)
    Power consumption 500VA (with automatic thread trimmer)

    Weight of the machine head U11 45kg (without device), 53kg (with UT35), 58kg (with UT37)

    Rated 0 out of 5
    (0 reviews)
    Read more
  • IIGM HP-600LF/LFS Straight Linear Fusing Press in bd | shohag enterprise
    Read more
    such as the special surface treatment applied to the major drive unit and the grease feeding method

    Straight Linear Fusing Press HP-600LF,HP-600LFS
    Get Latest Price
    Brand IIGM
    Power Supply 3Phase
    Rated Output 8.4 kW
    Fusing Width 600 mm
    Maximum Belt Speed 10.2m/min
    Heating Time 6-28 sec
    Rated 0 out of 5
    (0 reviews)
    Read more